Angles, Part 1
Use rise and run to determine rung mortise drilling angles in an existing chair | Read more…
Angles, Part 2
Use rise and run to determine rung mortise drilling angles when designing a chair | A simple rung mortise drilling jig | Read more…
Metamorphosis
Transforming a two inch thick board to a bent rear leg using steam bending | Read more…
Grain Orientation and Wood Movement, Part 1
Differences in wood movement in the tangential vs. radial plane | Ideal grain alignment for a rung to leg joint | Compromise grain alignment for the rungs to leg joint | Read more…
Grain Orientation and Wood Movement, Part 2
Optimal grain orientation for rear legs, slats, runners, and arms | Read more…